12 SERVICE WORK ON THE CHASSIS
12.10
52
F03183-10
F03184-10
Installing the lower triple clamp
B01605-10
F03183-11
Main work
–
Open the cable holder in front of the left radiator and detach the
wiring harness.
–
1
Remove screw
.
–
2
Remove screw
.
–
Take off the upper triple clamp with the handlebar and set it aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
3
Remove O-ring
and protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
p. 139)
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing.
–
Check whether upper steering head seal
–
2
Slide on protective ring
–
Position the upper triple clamp with the handlebar.
–
4
Mount screw
, but do not tighten yet.
–
Secure the wiring harness and the clutch line with the cable holder.
4
.
1
is correctly positioned.
3
and O-ring
.