Table of Contents
Advertisement
11.10
Installing the lower triple clamp
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing.
–
Check that the O-ring at the top
–
Slide on protective ring
B01605-10
–
Position the upper triple clamp with the handlebar.
–
4
Mount screw
A00802-10
–
Position the fork legs.
Air bleeder screw
front.
A
Valve
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
H01182-11
The air suspension is located in the left fork leg. The pres-
sure and rebound damping is located in the right fork leg.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
A00803-10
SERVICE WORK ON THE CHASSIS 11
p. 132)
1
is correctly positioned.
2
3
and O-ring
.
, but do not tighten yet.
5
of the right fork leg is positioned to the
6
.
M8
15 Nm (11.1 lbf ft)
49
Advertisement
Table of Contents
