Table of Contents
Advertisement
11.14
Installing the lower triple clamp
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing.
–
Push on the steering head seal
F03661-10
–
Position the upper triple clamp and handlebar.
–
2
Mount screw
Guideline
Screw, top steering
head
W00183-10
–
Position the fork legs.
Air bleeder screw
front.
A
Valve
Info
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
F03764-10
The air suspension is located in the left fork leg. The pres-
sure and rebound damping is located in the right fork leg.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
F03664-10
SERVICE WORK ON THE CHASSIS 11
p. 137)
1
.
, but do not tighten it yet.
M20x1.5
12 Nm (8.9 lbf ft)
3
of the right fork leg is positioned to the
of the left fork leg faces the front.
4
.
M8
12 Nm (8.9 lbf ft)
53
Advertisement
Table of Contents
