–
Remove screw plug
Info
Do not remove screw
S02288-10
–
Remove screw plug
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
S02289-10
–
Mount and tighten screw plug
O-rings.
Guideline
Screw plug, oil screen
S02290-10
–
Position long oil screen
–
Position the pin wrench through the drill hole of the screw plug in
the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
S02291-10
–
Mount and tighten screw plug
Guideline
Screw plug, oil screen
–
Mount and tighten oil drain plug
seal ring.
Guideline
Oil drain plug with
magnet
S02292-10
SERVICE WORK ON THE ENGINE 17
2
with the short oil screen and the O-rings.
A
.
3
4
with long oil screen
and the O-rings.
2
with the short oil screen and the
M20x1.5
15 Nm (11.1 lbf ft)
4
with the O-rings on a pin wrench.
3
with the O-ring.
M20x1.5
15 Nm (11.1 lbf ft)
1
with the magnet and a new
M12x1.5
20 Nm (14.8 lbf ft)
123