13 SERVICE WORK ON THE CHASSIS
13.10
46
M01668-10
Installing the lower triple clamp
F02885-10
M01844-11
–
3
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
p. 94)
–
Insert the lower triple clamp with the steering stem. Mount upper
1
steering head bearing
.
–
Check that the O-ring at the top
–
3
Push on protective ring
–
Position the upper triple clamp with the handlebar.
–
4
Mount nut
, but do not tighten it yet.
.
2
is correctly positioned.
.