Throttle Response - GAS GAS MC 450F 2022 Owner's Manual

16.3 Adjusting the characteristic map of the throttle response
Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide plate.
A guide plate with a different characteristic map is supplied.
Main work
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
–
2
Loosen nut
–
Turn adjusting screw
–
4
Loosen nut
–
Push cold start button
–
Turn adjusting screw
basic position when the throttle grip is turned to the front.
–
4
Tighten nut
–
Turn adjusting screw
the throttle grip.
Guideline
Play in throttle cable
–
2
Tighten nut
–
Slide on sleeve
A00896-10
–
Check the throttle grip for smooth operation.
Finishing work
–
Check the play in the throttle cable. (
Main work
–
Push back sleeve
–
Remove screws
–
Detach the throttle cables and take off the grip tube.
A00849-10
TUNING THE ENGINE 16
1
.
.
3
in as far as possible.
.
6
all the way to the stop.
5
so that the cold start button moves to the
.
3
so that there is play in the throttle cable at
3 ... 5 mm (0.12 ... 0.2 in)
.
1
.
p. 114)
1
.
2 3
and half-shells .
115