(MC)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
A00786-11
–
Plug in connector
–
Remove the wash cap set. Clean the quick release coupling thor-
oughly with compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
A00890-11
Silicone spray (
–
Join quick release coupling
Info
Route the cable and fuel line at a safe distance from the
exhaust system.
(EX)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
A00788-11
–
Plug in connector
–
Remove the wash cap set. Clean the quick release coupling thor-
oughly with compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
A00891-11
Silicone spray (
–
Join quick release coupling
SERVICE WORK ON THE CHASSIS 11
2
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
3
for the fuel pump.
p. 146)
4
.
2
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
3
for the fuel pump.
p. 146)
4
.
75