11 SERVICE WORK ON THE CHASSIS
11.10
42
Installing the lower triple clamp
F02885-10
F03023-10
F02179-11
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
p. 110)
–
Insert the lower triple clamp with the steering stem. Mount upper
1
steering head bearing
.
–
Check whether upper steering head seal
–
3
Push on protective ring
–
Position the upper triple clamp with the handlebar.
–
4
Mount nut
, but do not tighten yet.
–
Position the fork legs.
5
Bleeder screws
are positioned toward the rear.
Info
The upper milled groove in the fork leg must be flush with
the upper edge of the upper triple clamp.
2
is correctly positioned.
.