6.5
Start button
6.6
Combination switch (MC 450F TROY LEE DESIGNS)
(MC 450F TROY LEE DESIGNS)
The stop button
Possible states
•
The stop button
ignition circuit is closed and the engine can be started.
pressed – In this position, the ignition circuit is inter-
•
Stop button
rupted, a running engine stops, and a non-running engine will not
start.
S05124-10
1
Start button
is fitted on the right side of the handlebar.
Possible states
•
The start button
•
The start button
actuated.
A00759-11
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated when LED 1
1
lights up.
STANDARD with TC – STANDARD mapping with traction
1 TC
control is activated when LED 1 and TC light up.
ADVANCED – ADVANCED mapping is activated, when LED 2
2
lights up.
ADVANCED with TC – ADVANCED mapping with traction
2 TC
control is activated when LED 2 and TC light up.
The engine characteristic can be changed using button MAP on the com-
bination switch.
The launch control and the traction control can also be activated using
the combination switch.
H02887-01
1
is fitted on the left side of the handlebar.
is in the basic position – In this position, the
is in the basic position
is pressed – In this position, the starter motor is
CONTROLS 6
15