Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
11.9
11.10
48
Removing the lower triple clamp
A00801-10
A00800-10
Installing the lower triple clamp
B01605-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
(
–
Remove the start number plate. (
–
Remove front fender. (
p. 52)
–
Remove the handlebar cushion.
Main work
–
1
Open cable holder
on the left and detach the wiring harness.
–
2
Remove screw
.
–
3
Remove screw
.
–
Take off the upper triple clamp with the handlebar and set aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
4
Remove O-ring
.
–
5
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
p. 132)
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing.
–
Check that the O-ring at the top
–
2
Slide on protective ring
p. 44)
(
p. 89)
p. 46)
p. 52)
.
1
is correctly positioned.
3
and O-ring
.
Advertisement
Table of Contents
