11.10
Installing the fork legs
(All standard models)
–
Loosen screws
–
Loosen screws
A00788-10
(MC 450F TROY LEE DESIGNS)
–
Loosen screws
–
Loosen screws
S05129-10
Main work
–
Position the fork legs.
Air bleeder screw
front.
A
Valve
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
H01182-10
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The pres-
sure and rebound damping is located in the right fork leg.
(All standard models)
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom triple
A00778-11
clamp
SERVICE WORK ON THE CHASSIS 11
3
. Remove the left fork leg.
4
. Remove the right fork leg.
3
. Remove the left fork leg.
4
. Remove the right fork leg.
1
of the right fork leg is positioned to the
2
.
M8
20 Nm (14.8 lbf ft)
3
.
M8
15 Nm (11.1 lbf ft)
53