Table of Contents
Advertisement
–
Pull on the top section of the chain with the specified weight
Guideline
Weight, chain wear measure-
ment
–
Measure distance
Info
Chain wear is not always even, so you should repeat this
measurement at different chain positions.
Maximum distance
18 chain rollers at the longest
chain section
»
B
If distance
–
Change the drivetrain kit.
400987-10
–
Check the chain sliding guard for wear.
»
If the lower edge of the chain pins is in line with, or below, the
chain sliding guard:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
»
If the chain sliding guard is loose:
–
Tighten the screws on the chain sliding guard.
Guideline
Screw, chain
sliding guard
A00794-10
SERVICE WORK ON THE CHASSIS 11
10 ... 15 kg (22 ... 33 lb.)
B
of 18 chain rollers in the lower chain section.
272 mm (10.71 in)
B
from
is greater than the specified measurement:
Info
When a new chain is mounted, the rear sprocket
and engine sprocket should also be changed.
New chains wear out faster on an old, worn rear
sprocket or engine sprocket.
M6
6 Nm (4.4 lbf ft)
A
.
Loctite
®
243™
79
Advertisement
Table of Contents
