11.10
Installing the lower triple clamp
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing
–
Slide on O-ring
–
Position protective ring
V00489-10
–
Position the upper triple clamp with the handlebar.
–
4
Mount nut
, but do not tighten yet.
S03451-10
–
Position the fork legs.
Air bleeder screw
front.
A
Valve
of the left fork leg faces the front.
Info
The second milled groove (from the top) must be flush with
the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
S03452-10
rebound and compression damping is located in the right
fork leg.
SERVICE WORK ON THE CHASSIS 11
p. 119)
1
.
2
.
3
.
5
of the right fork leg is positioned to the
47