Table of Contents
Advertisement
8.4
Activating traction control (MC 450F TROY LEE DESIGNS)
Info
The traction control reduces excessive slip on the rear wheel in favor of more control and propulsion, particularly in
wet conditions.
When traction control is switched off, the rear wheel may spin more during high acceleration and on surfaces with
low grip.
Traction control can be switched on or off during the ride.
The setting most recently selected is activated again when restarting.
8.5
Activating the Factory Start (MC 450F TROY LEE DESIGNS)
Warning
Danger of accidents The Factory Start actuator may freeze up in cold weather.
If the actuator freezes while Factory Start is activated, the fork will not decompress fully.
The greatly reduced suspension travel impairs the handling characteristic.
–
Check that the actuator moves easily before activating the Factory Start.
–
Activate the Factory Start shortly before starting.
Info
The launch control is deactivated automatically for a few
seconds after the vehicle has started.
The launch control is also deactivated in the following cases
(malfunction indicator lamp no longer flashes): if the throttle
valve is closed more than 1/3 of the way after full throttle,
and/or if there is no start within 3 minutes.
For safety reasons, the engine must be switched off for at
least 10 seconds before the launch control can be activated
again, regardless of whether the vehicle has been started or
not.
If the engine has already been running for some time, the
engine must first be restarted before the launch control can
be activated.
–
Press button TC to switch the traction control on or off.
Guideline
Engine speed
The TC LED lights up when the traction control is activated.
H02885-01
RIDING INSTRUCTIONS 8
≤ 4,000 rpm
29
Advertisement
Table of Contents
