11 SERVICE WORK ON THE CHASSIS
56
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
H01182-11
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
A00803-10
–
Tighten screw
Guideline
Screw, top steering
head
A00804-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
A00805-10
–
Using a plastic hammer, tap lightly on the upper triple clamp to
avoid stresses.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Secure the wiring harness with cable holder
A00806-10
5
of the right fork leg is positioned to
of the left fork leg faces the front.
6
.
M8
15 Nm (11.1 lbf ft)
4
.
M20x1.5
12 Nm (8.9 lbf ft)
7
.
M8
20 Nm (14.8 lbf ft)
8
.
M8
20 Nm (14.8 lbf ft)
9
Loctite
®
243™
on the left.