11 SERVICE WORK ON THE CHASSIS
11.11
54
S05129-11
A00885-11
Removing the lower triple clamp
A00801-10
(MC 450F TROY LEE DESIGNS)
–
2
Tighten screws
.
Guideline
Screw, top triple
clamp
–
3
Tighten screws
.
Guideline
Screw, bottom triple
clamp
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws
.
Guideline
Screw, brake line
holder
Finishing work
–
Install the front wheel.
(
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
(
–
Remove the start number plate. (
–
Remove front fender. (
p. 61)
–
Take off the handlebar cushion.
Main work
(All standard models)
–
1
Open cable holder
ness.
–
2
Remove screw
.
–
3
Remove screw
.
–
Take off the upper triple clamp and handlebar and set it aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
M8
17 Nm (12.5 lbf ft)
M8
12 Nm (8.9 lbf ft)
4
.
25 Nm (18.4 lbf ft)
Loctite
EJOT
1.7 Nm (1.25 lbf ft)
p. 99)
p. 49)
(
p. 98)
p. 52)
p. 60)
on the left and detach the wiring har-
®
243™