11 SERVICE WORK ON THE CHASSIS
64
–
Position the link fork and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, fork pivot
A00816-10
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the direction
of travel.
A00812-10
–
Position the foot brake cylinder.
4
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws,
A00817-10
chassis
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
A00818-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the link fork slightly to be able to mount the screw
more easily.
A
.
2
.
M16x1.5
100 Nm (73.8 lbf ft)
3
.
engages in the foot brake cylinder.
5
.
M6
10 Nm (7.4 lbf ft)
6
.
M14x1.5
60 Nm (44.3 lbf ft)
B
.
7
.
M10
60 Nm (44.3 lbf ft)
Loctite
®
2701™