Table of Contents
Advertisement
HUAWEI NetEngine 8000 F
Hardware Guide
● When installing devices, ensure that the total heat consumption of all devices
● To prevent heat dissipation from being affected by air return, devices must be
● Ensure that heat dissipation holes on the panel are not blocked.
● When the chassis is installed together with other equipment in the same
● Determine whether the air exhaust vent affects adjacent devices to avoid high
Installing a Chassis in a Standard 19-Inch Cabinet
1.
2.
3.
Issue 05 (2023-03-31)
NO TICE
in the cabinet is less than or equal to the heat dissipation capability of the
cabinet.
installed at an interval of 1 U or more in the cabinet. In addition, the middle-
column cabinets support device stacking.
cabinet, do not install the chassis near the air exhaust vent of other equipment.
temperature of adjacent devices.
Wear an ESD wrist strap or ESD gloves. Ensure that the ESD wrist strap is
grounded and in close contact with your wrist.
Use a measuring tape to measure the distance between the front and rear
mounting rails in the cabinet.
Select front mounting brackets, rear mounting brackets, and rear mounting
bracket guide rails according to the distance between the front and rear
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
408
Advertisement
Table of Contents
