Product overview Power indicator Network status indicator ® LAN/WAN indicator Wi-Fi /WPS indicator Signal strength indicator Power input LAN/WAN port External antenna sockets Landline phone port Reset button Power button WPS button micro-SIM card slot...
Page 4
Setup Insert a micro-SIM card into the micro-SIM card slot as shown in the preceding diagram and then connect the power adapter to the B612 router. The router will turn on automatically and search for available mobile networks. The following indicators will turn on when the router has successfully connected to a network.
Page 5
Connecting to your router's Wi-Fi network SSID:....Wi-Fi KEY:..... Once the router has connected to a mobile data network, you can connect your computer or mobile phone to the router's Wi-Fi network to access the Internet. Please refer to the label on the back of the router for the default wireless network name (SSID) and password (Wi-Fi KEY).
Configuring your router IP:XXX.XXX.X.X User:yyy Password:zzz XXX.XXX.X.X User name: XXX.XXX.X.X Password: User name: Password: You can configure the router using the web-based management page. Please refer to the label on the back of the router for the default IP address, user name, and password.
Optional configurations The features described in this section are for reference purposes only. Your router may not support all of these features. 1. Connecting multiple devices You can connect a computer, or landline phone to the router to access the Internet, make telephone calls, and more.
2. Installing external antennas You can install external antennas to improve signal reception. Please contact your network service provider to purchase the antennas. If you only require one antenna, plug it into the socket. Note: Turn off the router and unplug the power adapter before installing any external antennas.
Page 9
3. Accessing the Internet through an Ethernet port You can connect the router to a wall-mounted Ethernet port using an Ethernet cable to connect to the Internet when you have used up your data allowance. Configure the relevant settings on the web-based management page before connecting to the Internet through an Ethernet port.
Page 10
4. Downloading Huawei HiLink App Scan the QR code to download the Huawei HiLink App and configure the router from your phone.
Restore the router to its factory settings. Contact your network service provider. Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region. Note: The illustrations in this guide are for reference purposes only and may not reflect the exact appearance of your product.
Page 12
FAQs How do I restore factory settings? When the router is turned on, press the reset button for approximately 3 seconds using a pointed object until the indicator starts to blink. Restoring factory settings will clear all customized settings. Proceed with caution.
Troubleshooting Why is the indicator red after I have finished configuring the router? Make sure you have a working micro-SIM card and ensure that it is inserted properly. Move the router to an open space free from obstructions and make sure you have an available mobile network in your area.
Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates.
Page 16
device. If any foreign object or liquid enters the device, immediately stop using it, power it off, and remove all cables connected to it. Then, contact an authorized service center. Observe local laws and regulations, and respect the privacy and legal rights of others.
warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area. Power adapter safety The power plug is intended to serve as a disconnect device. ...
If the device is not going to be used for an extended period of time, power it off, and remove all cables connected to it. If anything unusual occurs (for example, if the device emits smoke or any unusual sound or smell), immediately stop using it, power it off, remove all cables connected to it, and contact an authorized service center.
EU regulatory conformance Statement Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/certification.
Page 20
All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user. For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at http://consumer.huawei.com/certification.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.