Huawei NetEngine 8000 F Hardware Manual page 708

HUAWEI NetEngine 8000 F
Hardware Guide
2.
3.
4.
Issue 05 (2023-03-31)
Hold the handles of the COAX crimping tools to open the self-locking
mechanism. The jaw of the COAX crimping tools opens automatically, as
shown in Figure 4-370.
Figure 4-370 Pliers jaw opening automatically
Remove the mold from the COAX crimping tools, as shown in
Figure 4-371 Removing the mold from the COAX crimping tools
Place the mold to be installed into the jaw of the COAX crimping tools and
align the screw holes, as shown in
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Figure 4-372.
Figure 4-371.
697