Huawei NetEngine 8000 F Hardware Manual page 696

HUAWEI NetEngine 8000 F
Hardware Guide
●
Issue 05 (2023-03-31)
Figure 4-340 Installed OT terminal
Install two OT terminals on a post.
Before you install two OT terminals on a post, ensure that the two terminals
can be installed on the post and that the electrical connecting pieces have a
large contact area. Two OT terminals can be installed using any of these
methods:
– Bend the upper OT terminal at a 45- or 90-degree angle, as shown in
Figure 4-341.
– Cross the two terminals, as shown in
Figure 4-341 Bending the upper OT terminal at a 45- or 90-degree angle
Figure 4-342 Crossing two terminals
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Figure 4-342.
685