Related Manuals for Huawei OptiXstar EG8010Hv6-10
Summary of Contents for Huawei OptiXstar EG8010Hv6-10
- Page 1 Huawei OptiXstar EG8010Hv6-10 Quick Start for QR code Issue Date 2022-11-02 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
-
Page 3: Table Of Contents
Huawei OptiXstar EG8010Hv6-10 Quick Start for QR code Contents Contents 1 Placing the Device........................1 2 Connecting Cables........................3 3 Indicator Description......................5 4 Technical Specifications......................7 5 FAQs............................8 Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. -
Page 4: Placing The Device
The figure below shows an ONT that is horizontally placed on a desk. NO TE The appearance shown in this document may be different from the actual appearance of the product. The actual product prevails. Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. - Page 5 ONT onto the screws. NO TE It is recommended that the screw be about 4 mm in diameter and longer than 20 mm. The screw head should be between 6mm and 9mm in diameter. Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd.
-
Page 6: Connecting Cables
● To ensure normal use of fibers, make sure that the fiber bending radius is larger than 30 Item Description ON/OFF Powers the ONT on or off. POWER Connects to a power adapter. Connects to PCs or IP set-top boxes (STBs). Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. - Page 7 NOTE Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to access the Internet. If an ONT cannot access the Internet after a reset, contact your Internet service provider.
-
Page 8: Indicator Description
Blinks twice a The ONT attempts to set up second a connection with its upper- layer device. Steady on A connection is set up between the ONT and its upper-layer device. Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. - Page 9 Blinks once The hardware is faulty. every 2 every 2 seconds seconds NO TE If the ONT is not powered on or the power switch is turned off, all indicators are off. Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd.
-
Page 10: Technical Specifications
● Ambient humidity: 5%–95% (non-condensing) ● Dimensions (H x W x D): 26 mm x 69 mm x 83 mm ● Weight: About 80g ● Maximum system power consumption: 2.1 W Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. -
Page 11: Faqs
58/Edge 14/Firefox 54/Safari 10/Opera 55 or later is recommended. If the browser of an earlier version is used, compatibility issues may occur. Use a network cable to connect a PC to the Huawei ONT. Set the IP address of the PC in the same subnet as the web address of the For example, if the web address of the Huawei ONT is Huawei ONT. - Page 12 Use another PC to check whether the network speed is normal. How can I download Huawei ONT firmware or software? Huawei ONT is used with an OLT and NMS of a required version. If the versions are not the required ones, the ONT may not work.