Huawei NetEngine 8000 F Hardware Manual page 722

HUAWEI NetEngine 8000 F
Hardware Guide
Figure 4-384 Sample label on an optical fiber between two devices
The meaning of the label is listed in
●
●
Labels for the Optical Fibers Connecting the Device and an ODF
Meaning of the Labels
Table 4-85
between a device and an optical distribution frame (ODF).
Table 4-85 Information on labels affixed to a fiber between a device and an ODF
Content
MN-B-C-D-
R/T
Issue 05 (2023-03-31)
"A01-01-05-01-R" indicates that the local end of the optical fiber is connected
to the optical receiving interface 01 in slot 5, chassis 01 in the cabinet in row
A, column 01 in the machine room.
"G01-01-01-01-T" indicates that the opposite end of the optical fiber is
connected with optical transmitting interface 01 in slot 01, chassis 01 in the
cabinet in row G, column 01 in the machine room.
shows information on both sides of labels attached to an optical fiber
Meaning
MN: cabinet
number
B: chassis
number
C: physical slot
number
D: optical
interface
number.
R: Optical
receiving
interface
T: optical
transmitting
interface
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Figure 4-384.
Example
For example, A01.
Numbered in bottom-up order with two digits,
for example, 01.
Numbered in top-down and left-right order
starting from 01. For example, 01 is the first
slot at the top left of the chassis.
Numbered in top-down and left-right order,
consistent with the port sequence number on
the device.
-
711