BEFORE YOU WHERE TO PUT YOUR HOME WIRELESS BROADBAND To get the best signal, the ideal place for your GET STARTED device will be near a window. Try a few different areas until you find one with the best signal strength.
SIMPLE & EASY STEP 2 – CONNECT THE POWER ADAPTOR. 1. Follow the illustration to plug in the TO SET UP power adaptor. 2. Turn the power switch on and the device will start registering to the Optus network. STEP 1 – INSERT THE SIM CARD. Follow the 3 steps in the illustration below.
TWO WAYS TO CONNECT YOUR DEVICES TO THE NET. 1) Ethernet Cable 2) Wi-Fi Here’s how to enjoy a cable free connection to your Wi-Fi devices such as laptops, tablets and iPods. 1) Check to make sure the Wi-Fi indicator light on Connect one end of the Ethernet Cable into any your device is on.
If you want to change your password, check your family. speeds or find more info on your wireless network, 3) Search for the Huawei Wireless Network name just follow these simple steps: on your laptop/device. The network name or SSID can be found on the label of the back of...
• Steady cyan (blue): The DEVICE is connected to the Optus 4G Plus network. • Steady red: − The SIM card is not recognised or the PIN has not been entered correctly. − The device failed to connect to a wireless •...
5 – SIGNAL INDICATOR 9 – WPS BUTTON • On: Shows network signal strength. Full lights • Pressing this will let you choose between the means a strong signal. two supported Wi-Fi Networks. Here’s how: • Off: No network signal. –...
16 – LAN4/WAN INDICATOR Note: • The device supports USB 1.1 and 2.0 storage devices in FAT16, FAT32, • On: The port is connected to a device. ext2, and ext3 formats. Storage devices with power supply requirements exceeding USB standards may not work properly. It is recommended that you • Blinking: Data is being transmitted through the prepare an external power supply in these cases.
SUPER IMPORTANT! • During thunderstorms switch off the device MOVING HOME? and remove all cables. Your Home Wireless Broadband service can move • Do not use an external antenna or a power with you, just give us a buzz to make sure there’s adapter that is not a standard component for coverage in your new location. the device or is not Optus approved.
WAIT, I NEED HELP! Additional help information is located in the Help menu of your Optus Home Wireless Broadband software. For further assistance, you can call OPTUS TECHNICAL SUPPORT ON 133 697 IMM00402 (04/15)