Huawei NetEngine 8000 F Hardware Manual page 549

HUAWEI NetEngine 8000 F
Hardware Guide
Figure 4-197 Assembling the cabinet stand
1.
2.
3.
4.
5.
6.
7.
----End
Positioning the Cabinet Stand
?.1. Positioning a Single Cabinet Stand (for Installation of One Cabinet)
Issue 05 (2023-03-31)
Adjust the depth of the cabinet stand according to the cabinet depth.
Fasten the six M8x20 bolts on the expandable levels using the torque socket.
See callout 1 in Figure
Secure the expandable levels on the stand with eight M8x20 bolts. Use the
torque socket to fasten all the bolts with a torque of 13 N•m. See callout 2 in
Figure 4-197.
Fasten the six M8x20 bolts on the expandable levels using the torque socket
with a torque of 13 N•m. See callout 1 in
Check the stand with a level. See callout 3 in
If the stand leans, loosen the height locking bolts and adjust the height of the
stand until the stand is level.
Fasten all the locking bolts with a torque of 45 N•m. See callout 4 in
4-197.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
4-197.
Figure 4-197.
Figure 4-197.
Figure
538