Engineering Labels For Optical Fibers - Huawei NetEngine 8000 F Hardware Manual

HUAWEI NetEngine 8000 F
Hardware Guide

4.2.12.4.2 Engineering Labels for Optical Fibers

These labels are affixed to the optical fibers that connect the optical interfaces on
the boards in a chassis, or on the device boxes. There are two types of labels for
optical cables:
●
●
Labels for the Optical Fibers Connecting Devices
Meaning of the Label
Table 4-84
that connect two devices.
Table 4-84 Information on labels affixed to the fibers between two devices
Content
MN-B-C-D-
R/T
Example of the Label
Figure 4-384
Issue 05 (2023-03-31)
One is for the fiber that connects the optical interfaces on two devices.
The other is for the fiber that connects the device and the ODF.
lists information on both sides of the labels affixed to the optical fibers
Meaning
MN: cabinet
number
B: chassis
number
C: physical
slot number
D: optical
interface
number.
R: Receiving
interface
T: optical
transmitting
interface
shows a sample label on an optical fiber.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Example
M: The cabinet rows from front to back are
numbered from A to Z.
N: The cabinet columns from left to right are
numbered from 01 to 99.
For example, A01 is the cabinet in row A and
column 01.
Numbered in bottom-up order with two digits,
for example, 01.
Numbered in top-down and left-right order
starting from 01. For example, 01 is the first slot
at the top left of the chassis.
Numbered in top-down and left-right order,
consistent with the port sequence number on
the device.
-
710