Table of Contents
Advertisement
HUAWEI NetEngine 8000 F
Hardware Guide
Installing an SC Fiber Connector
Procedure
1.
2.
3.
Issue 05 (2023-03-31)
Figure 4-151 Disassembling an LC fiber connector
Remove the dustproof cap of the SC fiber connector and store it for future
use.
Align the core pin of the male connector with that of the female connector, as
shown in
Figure
4-152.
Figure 4-152 Aligning the male connector with the female connector
Feed the fiber connector into the female connector, with your fingers holding
the shell of the fiber connector (not the pigtail). When you hear a click, the
fiber connector is secured by the clips (internal parts, not illustrated in the
figure). Pull the fiber connector gently. If the connector does not loosen, the
installation is complete. As shown in
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Figure
4-153.
482
Advertisement
Table of Contents
