Qsfp-40G-Lx4-Mm (02314Mwg) - Huawei NetEngine 8000 F Hardware Manual

HUAWEI NetEngine 8000 F
Hardware Guide
Item
Center wavelength [nm]
Maximum Tx optical power (AVG)
[dBm]
Minimum Tx optical power (OMA)
[dBm]
Minimum extinction ratio [dB]
Receiver Optical Characteristics
Rx sensitivity (OMA) [dBm]
Overload power (AVG) [dBm]
NOTE

3.4.16.5 QSFP-40G-LX4-MM (02314MWG)

Table 3-201 QSFP-40G-LX4-MM specifications
Item
Basic Information
Module name
Part Number
Model
Form factor
Application standard
Connector type
Optical fiber type
Working case temperature [°C(°F)]
Transmission rate [bit/s]
Target transmission distance [km]
Transmitter Optical Characteristics
Issue 05 (2023-03-31)
Application limitations:
- In actual applications, the number of conversion connectors for the optical fiber link
cannot exceed 4.
- This module is sensitive to fiber link contamination. During deployment, ensure that the
fiber endface meets the fiber application standard. For details, see the single-mode
connector requirements under the ceramic ferrule endface requirements of fibers in section
"Cable -Optical Jumper."
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Description
Value
1271nm,1291nm,1311nm,1331nm
2.3 dBm
-7.0 dBm
3.5 dB
-10.5 dBm
3.5 dBm
Value
QSFP-40G-LX4-MM
02314MWG
OMMD15N01
QSFP+
40GBASE-LX4
LC
MMF
0°C to 70°C (32°F to 158°F)
40Gbit/s
150m
260