First, unpack your new router. The quick start guide The safety information 2 external antennae Your Huawei LTE Router 1 12vDC power supply cord 1 LAN cable The box it comes in...
Let’s get started. Screw the 2 external antennae into the back of your router. Connect the power supply into the router and into a power socket. Plug the yellow LAN cable into a port and the other end into the LAN port on your computer.
Ready to go. When the power light is blue you are ready to install the software. The mode LED light is either green for 3G or blue for 4G. The Wi-Fi light will be blue if Wi-Fi is enabled it and can flash as data is transferred.
Setting up the Router. Open your internet browser Change the admin password Choose Quick Setup from the left and go to http//192.168.1.1. of your router to your preferred navigation menu. Type in admin for both the password and click Submit. username and password.
Page 7
Almost there... Start with the Internet tab In the Wi-Fi tab change the In the last tab, Wi-Fi Security, and change the network mode Wi-Fi SSID to your preferred change the Wi-Fi key (WPA-PSK) to LTE/4G in the dropdown and Wi-Fi name.
Page 8
Last few steps. Review your information You’re connected. Start by viewing and click OK to submit. It is important your account details and logging to log out properly by clicking Logout, into My Telkom Services. and not just shutting down your browser window.
Page 9
Done. You’re connected. If you still need help call us on 10210.