Huawei NetEngine 8000 F Hardware Manual page 492

HUAWEI NetEngine 8000 F
Hardware Guide
3.
4.
5.
Issue 05 (2023-03-31)
Figure 4-148 Aligning the male connector with the female connector
Align the male connector with the fiber adapter and gently push the male
connector until it is completely seated in the fiber connector, as shown in
Figure 4-149.
Figure 4-149 Feeding the male connector into the female connector
A clicking sound indicates that the male connector is locked, as shown in
Figure 4-150.
Figure 4-150 Installed LC connector
To disassemble an LC fiber connector, press the locking nut to release the
locking clips from the bore, and gently pull the male connector, as shown in
Figure 4-151.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
481