Table of Contents
Advertisement
HUAWEI NetEngine 8000 F
Hardware Guide
Installing the Cabinet
1.
Issue 05 (2023-03-31)
Figure 4-10 Installing expansion bolts
Placing the cabinet.
a.
Place the cabinet on the specified position, and align the installation
holes of the cabinet with the holes on the floor.
b.
Fix the spring washer, flat washer and insulation tube on the expansion
bolt. Insert them into the holes and tighten the four expansion bolts a
bit, but do not fasten them.
c.
Lift one side of the cabinet and insert the insulation plate under the
cabinet. Insert another insulation plate under the other side of the
cabinet. Ensure that the gaps properly lock the expansion bolts.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
358
Advertisement
Table of Contents
