Table of Contents
Advertisement
HUAWEI NetEngine 8000 F
Hardware Guide
Tools, Equipment, and Materials
The following lists the required tools, equipment and materials for cleaning optical
fiber connectors:
●
●
●
Precautions
Laser energy is invisible and may cause eye injuries. Never look directly into fiber
connectors or ports.
Electrostatic discharge is hazardous to the electronic equipment. Wear an ESD
wrist strap and ensure that the strap is grounded properly before touching the
equipment and boards, to protect the static-sensitive components against
electrostatic discharge of the human body. Otherwise, the equipment may be
damaged or the service may be interrupted.
Procedure
1.
2.
3.
Issue 05 (2023-03-31)
cassette cleaner
Optical power meter
400X fiber microscope (A video fiber microscope is recommended.)
CA UTION
NO TICE
Shut down the laser and disconnect the fiber end before inspecting the fiber
connector.
Test the optical power using a power meter to ensure that the laser is shut
down.
Press down and hold the lever of the cassette cleaner. The shutter slides back
and exposes a new cleaning area. See
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Figure
4-47.
394
Advertisement
Table of Contents
