Settings In Trovis-View Software; General; System Requirements - Samson 3730 Series Mounting And Operating Instructions

13

Settings in TROVIS-VIEW software

13.1 General

The TROVIS-VIEW software allows various smart SAMSON devices to be configured over a
common operator interface. It consists of the operator interface, communication server, and
the device-specific module. The software has a Windows Explorer
The entire configuration of the positioner can be performed over the TROVIS-VIEW Configu-
ration and Operator Interface. It is not possible to link function blocks of other devices with
the TROVIS-VIEW software. The TROVIS-VIEW software containing online help and the da-
tabase module for Type 3730-3 Positioner is delivered on a CD-ROM (order number
6661-1056). Software updates are available in Internet (http://www.samson.de) in Products
> Support and downloads.
Note: The following instructions include a description on the key functions of the
TROVIS-VIEW software in conjunction with Type 3730-3 Positioner. Refer to the online help
in the ? menu for a detailed description.

13.1.1 System requirements

Hardware requirements
4
PC with Pentium II processor or equivalent (300 MHz or higher), 500 MHz recommended
4
Serial interface and USB/RS-232 adapter
4
Min. 96 MB RAM, 192 MB RAM recommended
4
Min. 150 MB free hard disk space plus approx. 10 to 15 MB additional hard disk space
per SAMSON module
4
SVGA graphic card (min. 800 x 600)
4
CD-ROM drive
Software requirements
4
Operating system: Windows
4
Microsoft.NET Framework Version 2.0 or higher (included on the installation CD-ROM)
4
Internet browser: Microsoft Internet Explorer, version 6.0 or higher
Accessories
4
Serial interface adapter, order no. 1400-7700
(SAMSON SSP interface/ RS-232 port of computer)
4
Isolated USB interface adapter, order no. 1400-9740
(SAMSON SSP interface/ USB port of computer)
® 2000 (min.SP2), Windows
Settings in TROVIS-VIEW software
® look and feel.
® XP, Windows ® Vista
99
EB 8384-3 EN