Samson 3730 Series Mounting And Operating Instructions page 102

Settings in TROVIS-VIEW software
5. Set the communications port for data
communication. Proceed as follows:
4
Connect the port (RS-232 or USB) of
the computer using the
corresponding adapter to the
SAMSON SSP interface of the
positioner.
4
Select Communications in Options
menu to open the server settings win-
dow. Click Server settings button.
4
Check Local connection and Auto-
matically local connect boxes and
click OK button to confirm server set-
tings.
The Communication window reap-
pears.
4
Click Port settings button.
4
The settings window opens and
State: not yet searched appears in
the Automatic detection field.
Click Start button.
TROVIS-VIEW has found the
positioner when State: Device found
on COM .... appears.
4
Click on OK button twice to confirm
settings.
6. If required, add a new TROVIS-VIEW
module by selecting Add module in the
Options menu. Enter the CD key (written
on the installation CD-ROM) in the open
window.
7. If required, enter the type, date and se-
lectable parameters which are used to automatically create the TROVIS-VIEW file name.
The file name created in this way appears on saving a TROVIS-VIEW file (e.g.
VIEW3_3730_3.tro) and can be adopted or altered.
102
EB 8384-3 EN