Samson 3730 Series Mounting And Operating Instructions page 41

Table 6 · Attachment of external position sensor
Mounting parts for actuators with 120 cm² see Fig. 12 left
Connecting plate (9, old) for Actuator
Type 3277-5xxxxxx.00
Direct attachment
Connecting plate (new) for Actuator Type 3277-5xxxxxx.01 (new)
Mounting parts for actuators with 240, 350 and 700 cm², see Fig. 12 right
NAMUR attachmt. Mounting parts for attachment to NAMUR rib w. lever L and XL, see Fig. 13
Micro-flow valve Mounting parts for Type 3510 Micro-flow Valve, see Fig. 14
VDI/VDE 3845, fixing level 2 with follower clamp and coupling wheel, version
with CrNiMo steel bracket, see Fig. 15
Attachment to
VDI/VDE 3845, fixing level 2, heavy-duty version
rotary actuators
SAMSON Type 3278 with 160 cm
heavy-duty version
Connecting plate (6)
Pressure gauge bracket (7)
Accessories for
positioner
Pressure gauge mounting kit up to max. 6 bar
(output/supply)
Bracket to mount the positioner on a wall
Note: The other fastening parts are to be provided at the site of installation as
wall foundations vary from site to site.
1)
Only new switchover and connecting plates can be used with new actuators (Index 01).
Old and new plates are not interchangeable.
Attachment to the control valve – Mounting parts and accessories
2
(also for VETEC Type S160 and Type R),
1400-7472
1
G 1400-6820
8
1
NPT 1400-6821
8
1)
1400-6823
1400-7471
1400-7468
1400-7469
1400-7473
1400-9384
1400-9385
1
G 1400-7461
4
1
NPT 1400-7462
4
1
G 1400-7458
4
1
NPT 1400-7459
4
St. steel/brass 1400-6950
St. steel/st. steel 1400-6951
0309-0111
EB 8384-3 EN
Order no.
41