Installing Trovis-View Software - Samson 3730 Series Mounting And Operating Instructions

Settings in TROVIS-VIEW software

13.2 Installing TROVIS-VIEW software

1. Insert the installation CD-ROM to start the installation program.
Once inserted, the CD-ROM usually starts the installation program automatically, de-
pending on the configuration of the operating system. If the program does not start auto-
matically, double-click setup.exe in the root directory of the CD-ROM in order to install
TROVIS-VIEW.
2. Follow the on-screen prompts and instructions of the installation program.
The TROVIS-VIEW Operator Interface can be used for different SAMSON devices. Note that
the installation program also offers you the option of installing a demo module. To use the
software without restrictions, the software needs to be activated by entering a CD key as fol-
lows:
3. After installation, a dialog box will appear, prompting you to enter the CD key, which
you will find on the cover of the original CD-ROM.
Once you have entered the correct CD key, an activation is necessary. The software can
be activated automatically or manually. Internet access on the computer on which
TROVIS-VIEW is installed is required for automatic activation.
Manual activation:
Once you have entered the correct CD key, a request code will be automatically generated
and displayed which contains computer identification details.
4
Enter request code in SAMSON's product activation server over the Internet.
(http://support.samson-ag.com:8082/activate_eng.html)
An activation code is generated which allows TROVIS-VIEW to be used without any
restrictions in the purchased scope.
4
Enter this activation code in TROVIS-VIEW.
The TROVIS-VIEW software is now ready for use.
Automatic activation:
A request code containing the computer identification details is transferred to the SAMSON
product activation server when an Internet connection is active and an activation code is au-
tomatically entered into TROVIS-VIEW.
The TROVIS-VIEW software is now ready for use.
Note: Refer to the readme.txt file in the root directory of the CD-ROM for further information
on installation, software updates and current system requirements.
100
EB 8384-3 EN