Samson 3730 Series Mounting And Operating Instructions page 60

Start-up – Settings
→ Code 3 , display: No
Turn
Press , Code 3 blinks
→ YES
Turn
Press , display
Enter the pin position and nominal range:
mm
mm
→ Code 4
Turn
Press , Code 4 blinks
→ Pin position on lever (see rele-
Turn
vant section on attachment)
Press .
→ Code 5
Turn
Press , Code 5 blinks
→ Nominal travel/angle
Turn
Press .
60
EB 8384-3 EN
Default No
Default No
Nominal range
(locked with Code 4 = No)
Select the initialization mode:
→ Code 6
Turn
Press , Code 6 blinks
→ SUb
Turn
Press to confirm the SUb as the initializa-
tion mode.
Enter the direction of action:
→ Code 7
Turn
Press , Code 7 blinks
→ Direction of action (ää or äæ)
Turn
Press .
Deactivate travel limit:
→ Code 11
Turn
Press , Code 11 blinks
→ No
Turn
Press .
Initialization mode
Default MAX
Default ää
Default 100.0