Connections On The Back Of The Appliance - Smeg WD2145 User Manual

LIFTING AND TRANSPORT
Before shipment from the factory, the base of the appliance is fixed to a pallet used for both lifting and transport.
When moving the appliance around, a forklift truck or pallet truck must be used.

10.3.1 CONNECTIONS ON THE BACK OF THE APPLIANCE

ID. DESCRIPTION
A Demi water intake hose
B Mains water intake hose
C Electricity supply cable
D Steam condenser exhaust hose
E Appliance drain hose
P1 Peristaltic pump P1 intake hose and P1 can detergent level sensor cable
P2 Peristaltic pump P2 intake hose and P2 can detergent level sensor cable
RS-232 port for PC or printer connection
Cables with connectors for correct connection are provided with the following accessories:
H
1. "WD-PRINTE" printer
2. PC connection cable, for communication of data by means of TRACELOG software.
User Manual
WD2145
WD1160, WD4060
WD2145-WD1160-WD4060-WD4190 Page 74 - 85