Troubleshooting; Confirming Whether There Is A Failure - Fujitsu M10-4 Service Manual

4.2

Troubleshooting

This section describes the troubleshooting procedure.
In the following cases, which are suspected failure conditions, use the
troubleshooting flow to identify the failure location. For details on the
troubleshooting flow, see
When the CHECK LED is on
■
When an error message is displayed on the console
■
When an error is displayed as a result of executing a command for checking the
■
status
When an error is displayed in the error log
■
4.2.1

Confirming whether there is a failure

This section describes the flow for confirming whether there is a failure. Also apply
this flow to identify failures in the PCI expansion unit.
50 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023
"4.2.1 Confirming whether there is a failure."