Fujitsu M10-4 Service Manual page 5

5.4.2 Enabling the removal of an I/O device 76
5.4.3 Releasing a chassis requiring maintenance from the physical
partition 85
5.5 Powering Off the Physical Partition Requiring Maintenance 87
5.6 Stopping the Entire System 89
5.6.1 Stopping the system with the XSCF command 89
5.6.2 Stopping the system from the operation panel 91
5.7 Saving XSCF Setting Information 91
5.8 Releasing a SPARC M10-4/M10-4S FRU from the System with the
replacefru Command 92
5.8.1 Releasing of the SPARC M10-4S chassis (possible only in a
system with a building block configuration) 92
5.8.2 Releasing of the power supply unit and fan unit of the SPARC
M10-4/M10-4S 94
5.9 Accessing a FRU 96
5.9.1 Removing the crossbar cables from the cable support 96
5.9.2 Lowering the cable support 99
5.9.3 Lowering the cable support (if it is a new model) 100
5.9.4 Removing the power cord 102
5.9.5 Removing the front cover 103
Chapter 6 Restoring the System 105
6.1 Restoring the Chassis 105
6.1.1 Installing the power cord 105
6.1.2 Fixing the cable support 106
6.1.3 Fixing the cable support (if it is a new model) 107
6.1.4 Attaching the crossbar cables to the cable support 108
6.1.5 Installing the front cover 109
6.2 Incorporating a SPARC M10-4/M10-4S FRU into the System with the
replacefru Command 110
6.2.1 Incorporation of the SPARC M10-4S chassis (possible only in a
system with a building block configuration) 110
Contents v