Fujitsu M10-4 Service Manual page 102

If the chassis requiring maintenance is the slave XSCF, go to step 4.
XSCF> switchscf -t Master
The XSCF unit switch between the Master and Standby states.
Continue? [y|n] : y
Log in to the master XSCF again.
3.
Execute the showpparstatus command to check the operating condition of
4.
the physical partition.
In the following example, [PPAR STATUS] displays "Running" for PPAR-ID 00,
indicating that the physical partition is operating.
XSCF> showpparstatus -p 0
PPAR-ID
00
5. Execute the showdomainstatus command to check the operating condition of
the logical domains.
In the following example, [Status] of the logical domain displays "Solaris
running", which indicates that Oracle Solaris is operating.
XSCF>
Logical Domain Name
primary
4S-159-D0-G0
4S-159-D0-G1
4S-159-D0-G2
6. Execute the showboards command to check the status of the chassis
requiring maintenance.
The BB-ID of the chassis requiring maintenance is indicated by the system board
(PSB) number.
In the following example, we can see that [PPAR-ID] of PSB 00-0 is "00."
XSCF> showboards -a
PSB
---- ------------ ----------- ---- ---- ---- ------- --------
00-0 00(00)
01-0 00(01)
02-0 00(02)
03-0 00(03)
7. Execute the poweroff command to stop all the logical domains on the
physical partition requiring maintenance.
Enter "y" in response to the confirmation message.
88 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023
PPAR Status
Running
showdomainstatus -p 0
Status
Solaris running
Solaris running
Solaris running
Solaris running
PPAR-ID(LSB) Assignment
Assigned
Assigned
Assigned
Assigned
Pwr Conn Conf Test
y y y Passed
y y y Passed
y y y Passed
y y y Passed
Fault
Normal
Normal
Normal
Normal