Prtdiag Command - Fujitsu M10-4 Service Manual

C.2

prtdiag Command

The prtdiag command displays the system settings and diagnosis information. The
diagnosis information shows FRUs in the system that experienced errors.
The prtdiag command is in the following directory: /usr/platform/platform-name/sbin/.
The prtdiag command may display a slot number different from what is supposed to
be displayed according to other parts of this manual. This does not indicate a fault.
Table C-2
for troubleshooting.
Table C-2 prtdiag command options
Option
No options
-v
The following example shows the output from the prtdiag command.
# prtdiag -v
System Configuration:
Memory size: 64000 Megabytes
================================ Virtual CPUs ================================
CPU ID Frequency Implementation
------ --------- ---------------------- -------
0 3000 MHz
1 3000 MHz
2 3000 MHz
3 3000 MHz
4 3000 MHz
5 3000 MHz
6 3000 MHz
7 3000 MHz
8 3000 MHz
9 3000 MHz
10 3000 MHz
11 3000 MHz
------------------------Omitted------------------------
59 3000 MHz
lists the options of the prtdiag command and how those options are useful
Description
Displays a list of components.
Displays information in detailed
(Verbose) mode.
Oracle Corporation
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
SPARC64-X
Application
Allows you to check the CPU
information, the memory
configuration, the mounted PCI
Express (PCIe) cards, the OpenBoot
PROM version, the mode switch
status, and the CPU operational
mode.
In addition to the content displayed
when no option is specified, this
option allows you to check detailed
information of the PCIe card.
sun4v SPARC M10-4
Status
on-line
on-line
on-line
on-line
on-line
on-line
on-line
on-line
on-line
on-line
on-line
on-line
on-line
Appendix C Oracle Solaris Troubleshooting Commands 355