Installing An Internal Disk - Fujitsu M10-4 Service Manual

Figure 10-5 Installing the disk filler
10.5

Installing an Internal Disk

This section describes the procedure for installing an internal disk. Perform
expansion using the same procedure.
When expanding an internal disk, remove the internal disk filler unit from the
1.
slot in which the disk is to be installed.
2. With the lever opened, hold the internal disk.
3. Carefully insert the internal disk into the slot.
Caution - Do not force the internal disk into the slot. Using excessive force may
damage the component or the chassis.
Close the lever to secure the internal disk.
4.
Note - Ensure that the internal disks are firmly inserted and secured.
298 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023