Figure 9-51 Installing the XSCF mount (for the SPARC M10-4S with a FRAME-B
CPU memory unit)
A
B
19. Install the XSCF board.
- For the SPARC M10-4 with a FRAME-A/FRAME-B CPU memory unit
Insert the XSCF board into guides at two locations (A in
mount (B in
Figure
(0.2 in.) to the right (C in
unit (D in
Figure
9-52), and push the right lever of the mount by about 5 mm
Figure
9-52) to attach (E in
9-52). Then, secure it with one screw (F in
Chapter 9 Maintaining the CPU Memory Unit/Memory
Figure
9-52) on the
Figure
9-52) the connector
Figure
9-52).
C
263