Fujitsu M10-4 Service Manual page 104

"Powering off," so you can see that the power-off instruction for the physical
partition completed successfully.
XSCF> poweroff -a
PPAR-IDs to power off:00,01,02
Continue? [y|n] : y
00 : Powering off
01 : Powering off
02 : Powering off
The following processes are performed.
- Oracle Solaris is completely shut down.
- The system stops and enters the POWERON READY state (The XSCF is running).
Note - The order in which logical domains shut down depends on the shut-down group
setting of Oracle VM Server for SPARC.
Confirm that the POWER LED on the operation panel is off.
4.
Note - For a building block configuration, check the POWER LEDs on all the chassis that
make up the system.
5. Execute the showpparstatus command to confirm that the power to the
physical partition has been turned off.
In the following example, [PPAR Status] displays "Powered Off" for PPAR-IDs
00, 01, and 02, indicating that the power to all the physical partitions has been
turned off.
XSCF> showpparstatus -a
PPAR-ID
00
01
02
Execute the showdomainstatus command to check the operating condition of
6.
the logical domains.
In the following example, [Status] of the logical domain displays "Solaris
powering down", which indicates that Oracle Solaris is powering off.
XSCF> showdomainstatus -p 0
Logical Domain Name
primary
4S-159-D0-G0
4S-159-D0-G1
4S-159-D0-G2
90 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023
PPAR Status
Powered Off
Powered Off
Powered Off
Status
Solaris powering down
Solaris powering down
Solaris powering down
Solaris powering down