Fujitsu M10-4 Service Manual page 130

Execute the showstatus command.
2.
Nothing is displayed when it is normal.
XSCF> showstatus
3. Execute the showlogs error command.
Confirm that no new errors are displayed.
XSCF> showlogs error
4. Execute the showhardconf command.
Confirm that no asterisk (*) is displayed in front of any FRU.
XSCF> showhardconf
SPARC M10-4;
+ Serial:2081230012; Operator_Panel_Switch:Service;
+ System_Power:Off; System_Phase:Cabinet Power Off;
BB#00 Status:Normal; Role:Master; Ver:2209h; Serial:2081231002;
+ FRU-Part-Number:CA07361-D203 A2
+ Power_Supply_System:Single;
+ Memory_Size:512 GB;
CMUL Status:Normal; Ver:0301h; Serial:PP140601D9
+ FRU-Part-Number:CA07361-D251 A4
+ Memory_Size:256 GB; Type: B ;
CPU#0 Status:Normal; Ver:4142h; Serial:00020203;
+ Freq:3.700 GHz; Type:0x20; (*2)
+ Core:16; Strand:2;
------------------------Omitted------------------------
PCI#0 Status:Normal; Name_Property:pci;
+ Vendor-ID:108e; Device-ID:9020;
+ Subsystem_Vendor-ID:0000; Subsystem-ID:0000;
+ Model:;
+ Connection:7001;
PCIBOX#7001; Status:Faulted; Ver:1110h; Serial:2121237001;
+ FRU-Part-Number:;
IOB Status:Normal; Serial:PP123403JE ;
LINKBOARD Status:Normal; Serial:PP1234026P ;
PCI#1 Name_Property:ethernet;
------------------------Omitted---------------------
*1 Type: B is displayed for a CMU that has the SPARC64 X+ processor mounted. Type: A is displayed for a CMU
that has the SPARC64 X processor mounted.
*2 If the SPARC64 X+ processor is mounted, 3.700 GHz; Type:0x20 is displayed. If the SPARC64 X processor is
mounted, 3.000 GHz; Type:0x10 is displayed.
*3 If the SPARC64 X+ (3.7 GHz (eight-core)) processor is mounted, "Core:8" is displayed.
116 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023
+ FRU-Part-Number:CA20365-B66X 008AG ;
+ FRU-Part-Number:CA20365-B60X 001AA ;
+ Vendor-ID:1077; Device-ID:8000;
+ Subsystem_Vendor-ID:1077; Subsystem-ID:017e;
+ Model:;
/9999999
;
/9999999
(*1)
(*3)
;
;