Table of Contents
Advertisement
7
Troubleshooting and Tips
V
CAUTION!
Observe the safety information in the „Security, Warranty and
Ergonomics" manual and in chapter "Hardware Installation" on page 25.
If a problem occurs, try to resolve it as described:
– in this chapter,
– in the documentation for the attached devices,
– in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê Make a list of the steps and the circumstances that led to the fault. Also make
a list of any error messages that were displayed.
Ê Switch off the server.
Ê Contact our customer service team.
7.1
Power-On Indicator Remains Dark
The power-on indicator remains dark after switching ON.
Power cord incorrectly connected
Ê Make sure that the power cable is correctly connected to the server and to
the grounded socket.
Power supply overloaded
Ê Pull the server power plug out of the power socket.
Ê Wait a few seconds before you plug it into the grounded socket again.
Ê Switch on your server.
A26361-K881-Z102-4-7619
71
Advertisement
Table of Contents
