ENGINE CONTROL SYSTEM
02FEEDBACKSYSTEM
02FEEDBACKSYSTEM
After extended usage, engine components may become deteriorated or worn out. This might make the
A/F (air / fuel moisture ratio) incorrect which could affect exhaust emissions. To correct the A/F, an
02
sensor must be temporally installed in the exhaust manifold. This sensor is used to measure the concen
tration of oxygen in the exhaust gas at engine speeds of
2000. 3000
and
4000
rpm. The ECM uses the
input data from the 0
2
sensor to correct the compensation coefficient of the fuel injection duration map
within the ECM itself.
0
2
sensor:
lnforms ECM of concentration of oxygen in exhaust gas.
ECM
,
Feedback
L----.J
1F ool1
5000002:
0
2
sensor
NOTE:
For fue/ mixture check (0
2
feedback) operation procedure, refer to "Bombardier Diagnostic System
Operation Manual".
3-30