Oil Level Ano Bleeoing; Oil Level; Air Bleeding - BOMBARDIER Johnson 90 Service Manual

POWER TRIM ANO TILT-90/115
OIL LEVEL ANO BLEEDING
OIL LEVEL AND BLEEDING
Oil Level
To check PTT oil level:
1. Raise engine to a full-tilt position.
2. Lower manual tilt lock lever
G).
3. Remove oil filler plug ~-
4. lf oil can be seen at filler plug level, unit is full.
5. lf oil level is low, refill with recommended oil.
Recommended oíl:
Dexron III automatic transmission fluid or equivalent
IACAUTION
1
To ensure consistent pump operation, do not mix differ­
ent types of oil.
6. Reinstall oil filler plug.
Air Bleeding
1. Check that manual release valve is tightened to specified
torque.
(!]
Manual release valve: 3.6 N,m (0.36 kg-m; 2.6 lb-ft)
IACAUTION
1
Do not overtighten manual release valve.
Counterclockwise
=
open
Clockwise
=
close
2. Operate PTT switch, raising and lowering motor up and
down (full tilt position to full trim down position) 4 to 5
times.
3. Check oil level, topping off if necessary.
4. Reinstall oil filler plug.
A Manual ratease valva
8-10