Starter Motor; Removal - BOMBARDIER Johnson 90 Service Manual

ELECTRICAL
STARTER MOTOR
STARTER MOTOR
Removal
Prior to removing starter motor:
• Disconnect battery cables from battery.
1 . Remove bolt
G)
and flywheel cover
®.
2. Remove bolt
CID
and negative
8
battery cable@.
3. Remove nut @ and positive
0
battery cable @ from
magnetic switch of starter motor.
4. Disconnect Red lead wire ( / ) from terminal "S" of starter
magnetic switch.
5. Remove two bolts @ securing starter motor. Remove
starter motor@ and dowel pins
®·
lnstallation
lnstallation is reverse order of removal with special attention
to the following steps.
• Apply engine oíl lightly to motor mounting bolts before
installing.
• lnstall starter motor and tighten mounting bolts securely.
~ Starter motor mounting bolt:
8 mm 23 N-m (2.3 kg-m; 16.5 lb-ft)
10 mm 50 N-m (5.0 kg-m; 36.0 lb-ft)
4-12